MSP360 News
Articles, guides, whitepapers and other useful content for MSPs and IT Professionals
How to Resize a Partition During the Restore from Image-Based Backup

Image-Based Backup and Recovery with MSP360 Backup

Image-Based Backup and Recovery with MSP360 Backup

MSP360 (formerly CloudBerry) Backup for Windows Server allows you to create a system image backup of selected partition and easily restore it. You can perform the restore directly from the cloud or USB flash drive to any dissimilar hardware or Hyper-V, VMware virtual machine or Amazon EC2, Microsoft Azure or Google Cloud virtual environment.

In this blog post, you can find the step-by-step guides on how to back up and restore your disk images with CloudBerry Backup software.

You might also be interested to check our system image backup guide.

Table of Contents

    Image-Based Backup with CloudBerry

    Note: For the most detailed manual with the screenshots illustrating each step please refer to this section of our Web Help.

    After launching CloudBerry Backup, you can run the Backup Wizard by clicking the Image Based button
    Performing the image-based backup with CloudBerry

    1Select the backup route. On this step, you can select whether you need to back up your disk image to a single destination or two destinations at once.

    2Select a backup destination.
    Image-based backup destination in CloudBerry Backup

    3Specify the plan name.

    4Select partitions to back up. With CloudBerry Backup you can choose to back up only system-required partitions, all drives, or only selected partitions.
    Image-based backup partition selection in CloudBerry Backup

    5Specify the advanced options.

    - Block-level backup. Activate this feature to back up only modified blocks of your data after each previous backup.
    When choosing this option, the wizard prompts you to schedule a full backup on a corresponding page.
    Further reading: Block-level Backup Explained

    - Exclude files/folders.  With this option enabled, you can specify which folders on the selected drives you need to exclude from your backup.
    Further reading: How to Exclude Files and Folders in Image-based Backup

    - Ignore bad sectors

    - Disable VSS, use direct access to NTFS volume

    - Use system VSS provider

    - Prefetch block count

    - Block size

    6 Specify the compression and encryption settings.

    7 Specify the retention policy.

    8 Specify the schedule settings to make your backup routine run automatically.
    Image-based backup schedule in CloudBerry Backup

    9 If you enabled block-level backup, specify the schedule for automatic running of a full backup.

    10 Chain your backups and assign pre-/post actions.

    11 Customize email notifications and system log settings.

    12 Review and run your backup plan.

    Now your backup plan is successfully created.

    Full System Backup and Recovery
    Check out our comprehensive guide covering system image, system state and application-aware backup and recovery, as well as bare-metal recovery:
    New call-to-action
    WP icon

    Restore from Image-Based Backup with CloudBerry

    Note: For the most detailed manual with the screenshots illustrating each step please refer to this section of our Web Help.

    1Start the Restore Wizard by clicking Restore button on the CloudBerry Backup toolbar and follow the Wizard steps.Restore from Image-Based Backup with CloudBerry

    2 Select backup storage. Skip the first wizard page and select a cloud or local storage to restore your backup from.

    3Specify the plan name.

    4Choose the data type you would like to restore.
    Restore from Image-Based Backup: Choosing the data type

    5 Select a restore point. You can choose to restore the latest version, restore your system to a specific point of time, or manually select the versions of each image to restore.

    6Specify the restore destination.
    Restore from Image-Based Backup: Specifying the restore destination

    7Select whether you need to use a temporary instance.

    8 Select partitions to restore. 
    If you would like to find out how to resize the partition while restoring from image-based backup, check out this guide.

    9 Specify the capacity of the destination disk.

    10 Decrypt restored files and specify the encryption password.

    11 In the next steps:
    - Schedule your restore plan.
    - Customize email notifications and system log settings.
    - Check network shares, if you specified one or more network locations.

    12Save and run your restore plan.

    Restoring System Image Backup on a Different Machine

    In some cases, you may need to perform the restore of your system on a different machine. CloudBerry Backup provides this opportunity. To restore your image backup on a machine with different hardware just follow the instruction below prior to running the Restore Wizard:

    1Download and install another copy of CloudBerry Backup for Windows Server on a new computer. You can take advantage of a 15-day trial.

    2Register exactly the same cloud storage account that used before.

    3Select the same storage bucket as before.

    4Click on the Advanced settings link to specify the backup prefix.

    5From the "Backup prefix" drop-down menu, select the same prefix that you used in your previous computer so CloudBerry Backup can find the data in the specified storage bucket.

    6The next step is to synchronize the repository in order to retrieve the metadata of all the files associated with the backed up system.

    Note: Repository sync will start automatically for all cloud storages except cold storages like Amazon Glacier.  Once sync completed, you will be able to see your backups on the Backup Storage tab. If it is not thereby some reason, run the repository sync manually:

    To synchronize the repository, select Options from the drop-down menu located in the top-right corner of the screen.options_sync

    7In the Options dialog, navigate to Repository tab and click Synchronize Repository button.rep_tab

    8In the Synchronize Repository dialog, select the desired storage account from the Account drop-down list and click Synchronize Now button.start_button.1

    After all the steps required for repository synchronization are done, just go ahead and run the CloudBerry Restore Wizard to recover your system from an image backup.


    You can try CloudBerry Backup for Windows Server with the image-based backup and recovery features absolutely for free. Just go ahead and download our 15-day fully-functional trial version and check if it meets your requirements.

    MSP360 Backup icon
    MSP360 Backup for Windows Server
    • Image-based, system state and file-level backup
    • Local, cloud and hybrid backup
    • Multiple recovery options (bare-metal, USB, cloud)
    New call-to-action